Leitz - Hinge Boring Bits - Advantage Solutions Inc.

Description

Hinge Boring Bits

No. of teeth: Z2/V2
RPM: n = 2800-7000 min-1

Z2, V2 with centre-point, projection 2,5 mm past cutting edge
Diagram to determine the feed speed vf depending on the RPM n of the spindle

Design Z2/V2, GL = 57 mm. Ideal for solid wood because of the projecting centre-point.
WB 310-0-04 *

Class.	D mm	GL mm	L mm	S mm	ID Nr. LL		ID Nr. RL
*	15	57	54,5	10×26	034630	•	034631	•
*	16	57	54,5	10×26	034632	•	034633	•
*	18	57	54,5	10×26	034634	•	034635	•
*	20	57	54,5	10×26	034636	•	034637	•
*	22	57	54,5	10×26	034638	•	034639	•
*	24	57	54,5	10×26	034640	•	034641	•
*	25	57	54,5	10×26	034642	•	034643	•
*	26	57	54,5	10×26	034644	•	034645	•
*	28	57	54,5	10×26	034646	•	034647	•
*	30	57	54,5	10×26	034648	•	034649	•
*	35	57	54,5	10×26	034650	•	034651	•
*	40	57	54,5	10×26			034677	•

Spare parts

BEZ	ABM	BEM	ID Nr.
Screw	M 5×10	Length adjustment	005802	•

Design Z2/V2, GL = 70 mm. Ideal for solid wood because of the projecting centre-point.

WB 310-0-04 *

Class.	D mm	GL mm	L mm	S mm	ID Nr. LL		ID Nr. RL
*	15	70	68	10×26	034663	•	034664	•
*	18	70	68	10×26			034678	•
*	20	70	68	10×26	034665	•	034666	•
*	24	70	68	10×26			034679	•
*	25	70	68	10×26	034667	•	034668	•
*	30	70	68	10×26	034669	•	034670	•
*	35	70	68	10×26	034671	•	034672	•

Spare parts

BEZ	ABM	BEM	ID Nr.
Screw	M 5×10	Length adjustment	005802	•

____________________________________________________________________________________________
Drill HW
Design Z3/V3, GL = 57 mm. For high feeds compared to Z2/V2. Design without projecting centre-point. For boring workpieces near the bottom surface layer without marking or piercing the surface. Not suitable for solid wood.

No. of teeth: Z3/V3
RPM: n = 2800-7000 min-1

Drilling
Z 3, V 3 with V-shaped cutting edge, without centre-point
Diagram to determine the feed speed vf depending on the RPM n of the spindle